Description
Allows you to use your Sega Galaxian based pre-JAMMA game,s in a JAMMA cabinet or a super gun device.
In the early 1980s, Sega licensed a few games from other arcade developers, which they then manufactured and distributed. The hardware was based on a modified Galaxian board usually with additional rom and sound boards.
The pinout for these games varies somewhat from the original Galaxian pinout, changing the location of the pins responsible for controls and sound, and is completely different from the pinout used by the original manufacturer of the game.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| GND | GND |
| +12V | +12V |
| +12V | +12V |
| SPK+ | AUDPOTIN |
| VSYNC | VBLUE |
| VGREEN | VRED |
| GND | AUDPOTGND |
| NC | P1DOWN |
| NC | AUDPOTOUT |
| NC | P1B1 |
| P1RIGHT | P1LEFT |
| P2START | P1START |
| SVC | TEST |
| COIN2 | COIN1 |
| COUNT1 | NC |
| NC | NC |
| COINRET | NC |
| +5V | +5V |
| +5V | +5V |
| GND | GND |
| GND | GND |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This is the list of compatible games that can be used with this adapter:
The adapter has been tested with genuine versions of Sega Frogger and Sega Moon Cresta.
Revision History:
Rev 1.0: Initial Design.
Rev 1.1: Changes to the sound adjustment circuit. This is the currently available version.
Specifications
Board Size: 45mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V-3A