Description
Allows you to use your Jump Bug game board, in a JAMMA cabinet or a super gun device.
Jump Bug was developed by Alpha Denshi and was distributed by Sega in Japan and Europe, and by Rock-Ola in North America. It was the first forced scrolling platform shooter to include both horizontal and vertical scrolling levels, and limited form of parallax scrolling.
Jump Bug’s hardware is based on Galaxian. The Sega version of the game uses the Sega Galaxian pcb, while the Rock-Ola version uses a different board with a unique pinout. This adapter is intended to be used with the Rock-Ola North American version of the game.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| GND | GND |
| +12V | +12V |
| +12V | +12V |
| SPK+ | NC |
| VSYNC | VBLUE |
| VGREEN | VRED |
| NC | NC |
| COIN2 | TABLE |
| P2RIGHT | P2LEFT |
| P2B1 | P1B1 |
| P1RIGHT | P1LEFT |
| P2START | P1START |
| P1UP | P1DOWN |
| P2UP | COIN1 |
| NC | P2DOWN |
| NC | NC |
| NC | NC |
| +5V | +5V |
| +5V | +5V |
| GND | GND |
| GND | GND |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This is the list of compatible games that can be used with this adapter:
This adapter has been tested with a genuine Jump Bug board for compatibility.
Revision History:
Rev 1.0: Initial Design.
Specifications
Board Size: 50mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V-3A