Description
The DECO Cassette System was introduced in December 1980 by Data East. It was the first arcade system that allowed arcade operators to change games and used audio micro-cassettes as the storage medium. Operators were required to purchase a generic DECO cassette cabinet, and games would come in form of a kit that would include the instruction manual, the cassette and a security dongle.
On power up, the system would load the contents of the game from the cassette into ram, which took 2-3 minutes on average, and the ram would retain the contents of the game until rebooted.
The system itself proved quite unreliable, and did not sell very well. Today there are very few of these systems still in working condition. In addition to that, many of the popular games released for the DECO system, were re-released as a standalone, ROM based game, in their own dedicated cabinet. In fact, many more of these dedicated games exist today.
This adapter is intended to be used with the original DECO Cassette System board. For games that got re-released on their own dedicated ROM based hardware, please see the Data East Dedicated to JAMMA Adapter page here.
Images
Pinout
This adapter follows the following pinout scheme:
Main Edge Connector
| BOTTOM ROW | TOP ROW |
|---|---|
| GND | GND |
| +5V | +5V |
| P1AD1 | P1AD0 |
| GND | GND |
| +12V | +12V |
| COUNT1 | COUNT2 |
| GND | GND |
| OUT3 | OUT2 |
| OUT1 | OUT0 |
| GND | GND |
| NC | COIN1 |
| NC | COIN2 |
| GND | GND |
| NC | P2START |
| P1START | NC |
| NC | CP10(TST) |
| P2B4 | P2B3 |
| P2B2 | P2B1 |
| P2DOWN | P2UP |
| P2LEFT | P2RIGHT |
| P1B4 | P1B3 |
| P1B2 | P1B1 |
| P1DOWN | P1UP |
| P1LEFT | P1RIGHT |
| GND | GND |
(PCB connector facing away, list is ordered right to left)
Power Connector (with included cable)
| PIN | FUNCTION |
|---|---|
| 1 | +12V |
| 2 | +5V |
| 3 | +12V |
| 4 | GND |
| 5 | GND |
| 6 | -5V |
| 7 | +5V |
| 8 | NC |
Video Connector (with included cable)
| PIN | FUNCTION |
|---|---|
| 1 | VBLUE |
| 2 | VGREEN |
| 3 | VRED |
| 4 | GND |
| 5 | NC |
| 6 | VSYNC |
Compatible Games
This adapter is compatible with:
For addition information on this system and a list of games developed for it, see this page.
Revision History:
Rev 1.0: Initial Design.
Specifications
Board Size: 50mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V-3A, -5V – 3A