Description
Allows you to connect and play your Atari Cloak & Dagger or Agent-X PCB to a JAMMA cabinet or supergun.
Cloak & Dagger was released by Atari in 1984 as a tie in to the movie of the same title. The game initially started off as Agent-X and was reworked slightly for the movie. Both games exist as dedicated machines, and run on the same board with minor differences, Agent-X having a considerably smaller production numbers.
The original game uses two joysticks, similar to the control scheme of games like Robotron 2084, however it requires one additional button. For this reason, this adapter uses both player 1 and player 2 JAMMA joysticks as well as player 1 button 1, and is not suitable for cabinets that only have 1 joystick present.
Both Agent-X and Cloak & Dagger can be converted with this adapter.
Images
Pinout
This adapter follows the following pinout scheme:
Main Connector (44 pin)
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| +5V | +5V |
| +12V | NC |
| -5V | NC |
| +12V | NC |
| NC | NC |
| P1LUP | P1LRIGHT |
| P1RLEFT | P1LDOWN |
| P1RUP | P1RRIGHT |
| P1LLEFT | P1RDOWN |
| P2LUP | P2LRIGHT |
| P2RLEFT | P2LDOWN |
| P2RUP | P2RRIGHT |
| P1LLEFT | P2RDOWN |
| COIN1 | COINR |
| TABLE | COIN2 |
| P2BTN1 | P1BTN1 |
| TEST | +12V |
| NC | -5V |
| NC | +12V |
| +5V | +5V |
| GND | GND |
Secondary Connector (24 pin)
| SOLDER SIDE | PARTS SIDE |
|---|---|
| START1LED | COUNT2 |
| NC | COUNT1 |
| P1START | START2LED |
| P2START | NC |
| AUD1 | NC |
| NC | NC |
| NC | NC |
| NC | NC |
| AUD2 | AGND |
| VGREEN | NC |
| VRED | NC |
| VBLUE | GND |
Power Connector (10 pin)
| PIN | FUNCTION |
|---|---|
| 1 | GND |
| 2 | +5V |
| 3 | +12V |
| 4 | -5V |
| 5 | VSYNC |
| 6 | NC |
| 7 | -5V |
| 8 | +12V |
| 9 | +5V |
| 10 | GND |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This is the list of compatible games that can be used with this adapter:
The adapter has been tested with a genuine version of Atari Agent-X.
Important: This adapter requires a JAMMA setup with 2 joysticks, one for each player.
Revision History:
Rev 1.0: Initial Design.
Specifications
Board Size: 50mm x 190mm
Current Carrying Capacity: 5V – 12A, 12V-3A, -5V – 3A