Astro Fighter to JAMMA Adapter

Description

Data East Corporation released Astro Fighter in Japan in 1979. It was well received and became one of the top earners thoughtout 1980, getting beaten out only by the three mega-hits: Asteroids, Galaxian and Space Invaders.

Astro Figher was popular enough to get licensed by Sega / Gremlin for the US market, while the cocktail version was distributed simultaneously by DECO themselves.

Astro Figher is one of the unique DECO games from this period which did not get a DECO Cassette release. The Cassette System did get a sequel however called Super Astro Fighter which arguably isn’t all that super.

The game PCB is a cage stack of several boards, and comes in two flavors, the DECO version and the slightly modified Sega / Gremlin version. The pinout is nearly identical for both, but the Sega version requires an external sound amplifier which is built into the adapter. The adapter supports both versions of the game.

Images

Pinout

This adapter follows the following pinout scheme:

Main Connector

SOLDER SIDEPARTS SIDE
+5V+5V
GNDCOUNT1
NCCOUNTPWR
NCNC
NCNC
NCP2B1
NCP2LEFT
NCP2RIGHT
NCP1B1
NCP1LEFT
NCP1RIGHT
NCP2START
NCP1START
SVCNCSVCNO
COINNCCOINNO
SPK-SPK+
VGNDVSYNC
VBLUEVGREEN
VREDNC
GNDNC
GNDNC
GNDGND

(PCB connector facing away, list is ordered right to left)

Power Connector

PINFUNCTION
1GND
2GND
3-5V
4NC
5+12V
6+12V
7+5V
8+5V
9NC
10NC

Compatible Games

Game PCBs with a similar or compatible pinout are:

and possibly other DECO games from that period, specifically the two earlier games Space Fighter and Super Break. These games are fairly uncommon so additional compatibility has not yet been verified.  This adapter was tested with both genuine Sega / Gremlin and DECO versions of Astro Fighter.

Revision History

Rev 1.0: Initial Design.

Specifications

Board Size: 50mm x 112mm
Current Carrying Capacity: 5V – 3A, 12V – 2A, -5V – 2A