Description
Allows you to play your JAMMA games in a SNK (type B) cabinet or a cabinet wired according to that conversion class. This adapter will play JAMMA games with up to 3 buttons.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| +5V | +5V |
| COIN1 | COIN2 |
| SVC | TEST |
| P1START | P2START |
| P1UP | P1DOWN |
| P1LEFT | P1RIGHT |
| P1B1 | P1B2 |
| P1B3 | NC |
| P2UP | P2DOWN |
| P2LEFT | P2RIGHT |
| P2B1 | P2B2 |
| P2B3 | NC |
| GND | GND |
| GND | GND |
| -5V | -5V |
| NC | NC |
| VSYNC | VBLUE |
| VGREEN | VRED |
| SPK+ | SPK- |
| +12V | +12V |
| GND | GND |
| GND | GND |
(Adapter edge connector facing away, list is ordered right to left)
Button and Switch Layout:
In most circumstances this adapter will work as intended with your cabinet without any modifications. Problems may occur in a modified cabinet, or with games that require more than 3 buttons.
Some SNK game cabinets use different button mappings. Games that use 2 buttons may use JAMMA buttons 1 and 2 (Ikari Warriors), or buttons 2 and 3 (Alpha Mission and others). Also, games that use rotary joysticks may not work correctly with JAMMA games. If the button order is wrong you may need to swap the wires going to the buttons behind the control panel.
Compatible Cabinets
This is the list of games that should be compatible with this adapter:
Revision History:
Rev 1.0: Initial Design.
Specifications
Board Size: 45mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V – 3A, -5V – 3A