Description
Allows you to play your JAMMA games in a Namco Rally-X cabinet. This adapter will play JAMMA games with up to one button.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| GND | GND |
| +12V | +12V |
| SPK+ | SPK- |
| VSYNC | VBLUE |
| VGREEN | VRED |
| VGND | GND |
| TABLE | NC |
| TEST | CREDSW |
| P2B1 | P1B1 |
| P2LEFT | P1LEFT |
| P2RIGHT | P1RIGHT |
| P2DOWN | P1DOWN |
| P2UP | P1UP |
| P2START | P1START |
| NC | COIN1 |
| COUNT1 | NC |
| CREDMULTPW | CREDMUL |
| +5V | +5V |
| +5V | +5V |
| GND | GND |
| GND | GND |
(Adapter edge connector facing away, list is ordered right to left)
Important: This adapter does not connect the -5V power rail which is not present in Rally-X cabinet’s wiring harness. Games that require -5V may not run.
Button and Switch Layout:
In most circumstances this adapter will work as intended with your cabinet without any modifications. Problems may occur in a modified cabinet, or with games that require more than one button or more than one coin switch.
Compatible Games
This is the list of compatible game cabinets that can be used with this adapter:
Revision History:
Rev 1.0: Initial Design. Current version.
Specifications
Board Size: 45mm x 112mm Current Carrying Capacity: 5V – 12A, 12V-3A