Description
Taito licensed games from other manufacturers on occasion. One such game was Gladiator, released under a license from Allumer. Same hardware was reused later for another Taito release, Ping Pong King.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| GND | GND |
| +5V | +5V |
| NC | NC |
| +12V | +12V |
| SPK+ | SPK- |
| VSYNC | COUNT1 |
| VBLUE | COIN2 |
| VGREEN | COIN1 |
| VRED | NC |
| P1B2 | P2B2 |
| P1B1 | P2B1 |
| P1DOWN | P2DOWN |
| P1UP | P2UP |
| P1RIGHT | P2RIGHT |
| P1LEFT | P2LEFT |
| P1B3 | P2B3 |
| P1START | P2START |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This is the list of compatible games that can be used with this adapter:
The adapter has been tested with a genuine Taito Gladiator pcb.
Revision History:
Rev 1.0: Initial Design. Current version.
Specifications
Board Size: 45mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V-3A