Description
Allows you to use your Champion Baseball pre-JAMMA game, in a JAMMA cabinet or a super gun device.
Champion Baseball was originally developed by Alpha Denshi, and was released and distributed worldwide by Sega for the arcade market.
This is yet another game released by Sega with a unique pinout, likely the result of not being developed in house by Sega themselves.
Images
Pinout
This adapter follows the following pinout scheme:
| SOLDER SIDE | PARTS SIDE |
|---|---|
| COIN2 | VSYNC |
| NC | VGREEN |
| P2B3 | VBLUE |
| VRED | NC |
| P1DOWN | P1B3 |
| COIN1 | P1START |
| P1B2 | P2START |
| P1B1 | P2B1 |
| P1UP | P2B2 |
| +5V | +5V |
| P1LEFT | P1RIGHT |
| P2LEFT | P2RIGHT |
| P2UP | P2DOWN |
| +12V | +12V |
| NC | SPK+ |
| NC | NC |
| GND | GND |
| GND | GND |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This is the list of compatible games that can be used with this adapter:
The adapter has been tested with genuine versions of Champion Baseball and Champion Baseball II.
Revision History:
Rev 1.0: Initial Design.
Specifications
Board Size: 45mm x 112mm
Current Carrying Capacity: 5V – 12A, 12V-3A