Description
Allows you to play your 8 liner, video slots, video poker or games of similar nature in a JAMMA cabinet or a supergun device.
Games of this type use a somewhat standardized 72 pin edge connector for controls and video and audio output along with a 20 pin power edge connector. These games are also known as Pot of Gold (POG) or Cherry Master type games.
This adapter includes the required 20 pin power connector and wire harness, and features a 12V lamp header along with a control map for providing 8 liner specific functions via the typical JAMMA controls.
Please note that this adapter is not suitable for gambling and redemption environments. The adapter does not provide wiring or headers for payout and complex coin or bill acceptor system functions.
Images
Control Map
Some 8 liner functions don’t have a JAMMA equivalent. The following mapping is used to wire these functions to corresponding JAMMA controls.
| 8 LINER FUNCTION | JAMMA FUNCTION |
|---|---|
| SMALL | P1 DOWN |
| BIG | P1 UP |
| BET | P1 BUTTON 1 |
| TAKE | P1 BUTTON 2 |
| DOUBLE UP | P1 BUTTON 3 |
| START | P1 START |
Pinout
This adapter follows the following pinout scheme:
Main Edge Connector
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| NC | NC |
| NC | NC |
| DBL UP LAMP | DBL UP LAMP |
| TAKE LAMP | TAKE LAMP |
| BET LAMP | BET LAMP |
| BIG LAMP | BIG LAMP |
| START LAMP | START LAMP |
| NC | COUNT KEY |
| COUNT | COUNT HOPPER |
| LOCK3 | COUNT3 |
| LOCK2 | COUNT2 |
| NC | COUNT KEY IN |
| LOCK1 | COUNT1 |
| COIN HOPPER | HOPPER FULL |
| KEY OUT | PAY OUT |
| TEST | BOOKS |
| COIN3 | COIN2 |
| KEY IN | COIN1 |
| NC | NC |
| BIG | BIG |
| NC | NC |
| NC | NC |
| DBL | DBL |
| TAKE | TAKE |
| BET | BET |
| SMALL | SMALL |
| START | START |
| ADJ | TICKET NOTCH |
| NC | TICKET |
| NC | NC |
| NC | NC |
| NC | NC |
| SPK- | SPK+ |
| VSYNC | VBLUE |
| VGREEN | VRED |
(PCB edge connector facing away, list is ordered right to left)
Power Edge Connector (20 Pin)
| SOLDER SIDE | PARTS SIDE |
|---|---|
| GND | GND |
| GND | GND |
| +5V | +5V |
| +5V | +12V |
| NC | NC |
| NC | NC |
| NC | NC |
| GND | GND |
| GND | GND |
(PCB edge connector facing away, list is ordered right to left)
Compatible Games
This adapter should be compatible with 8 liner type games that are compatible wih the pinout listed above. The adapter has been tested with dozens of similar games from different manufacturers including:
- Cherry Master
- Lucky 8 Lines
- Cherry Bonus
Revision History:
Rev 1.0: Initial Design.
Rev 1.1: Changes to 3.96mm power and 2.54mm lamp header location. Removed LED indicators.
Specifications
Board Size: 48mm x 144mm
Current Carrying Capacity: 5V – 12A, 12V – 3A, -5V – 3A